2. EL 7
  3. postfix
  4. mysql_table(5)

Scroll to navigation

MYSQL_TABLE(5) File Formats Manual MYSQL_TABLE(5)

NAME

mysql_table - Postfix MySQL client configuration

SYNOPSIS

postmap -q "string" mysql:/etc/postfix/filename
postmap -q - mysql:/etc/postfix/filename <inputfile

DESCRIPTION


The Postfix mail system uses optional tables for address rewriting or mail routing. These tables are usually in dbm or db format.

Alternatively, lookup tables can be specified as MySQL databases. In order to use MySQL lookups, define a MySQL source as a lookup table in main.cf, for example:



    alias_maps = mysql:/etc/mysql-aliases.cf

The file /etc/postfix/mysql-aliases.cf has the same format as the Postfix main.cf file, and can specify the parameters described below.

BACKWARDS COMPATIBILITY



For compatibility with other Postfix lookup tables, MySQL
    parameters can also be defined in main.cf. In order to do that, specify as
    MySQL source a name that doesn't begin with a slash or a dot. The MySQL
    parameters will then be accessible as the name you've given the source in
    its definition, an underscore, and the name of the parameter. For example,
    if the map is specified as "mysql:mysqlname", the parameter
    "hosts" below would be defined in main.cf as
    "mysqlname_hosts".


Note: with this form, the passwords for the MySQL sources are
    written in main.cf, which is normally world-readable. Support for this form
    will be removed in a future Postfix version.


Normally, the SQL query is specified via a single query
    parameter (described in more detail below). When this parameter is not
    specified in the map definition, Postfix reverts to an older interface, with
    the SQL query constructed from the select_field, table,
    where_field and additional_conditions parameters. The old
    interface will be gradually phased out. To migrate to the new interface
  set:






    query = SELECT [select_field]


        FROM [table]


        WHERE [where_field] = '%s'


            [additional_conditions]


Insert the value, not the name, of each legacy parameter. Note
    that the additional_conditions parameter is optional and if not
    empty, will always start with AND.






LIST MEMBERSHIP




When using SQL to store lists such as $mynetworks, $mydestination,
    $relay_domains, $local_recipient_maps, etc., it is important to understand
    that the table must store each list member as a separate key. The table
    lookup verifies the *existence* of the key. See "Postfix lists versus
    tables" in the DATABASE_README document for a discussion.


Do NOT create tables that return the full list of domains in
    $mydestination or $relay_domains etc., or IP addresses in $mynetworks.


DO create tables with each matching item as a key and with an
    arbitrary value. With SQL databases it is not uncommon to return the key
    itself or a constant value.






MYSQL PARAMETERS





  

  
The hosts that Postfix will try to connect to and query from. Specify
      unix: for UNIX domain sockets, inet: for TCP connections
      (default). Example:
    


    hosts = host1.some.domain host2.some.domain:port


    hosts = unix:/file/name

    
The hosts are tried in random order, with all connections over
        UNIX domain sockets being tried before those over TCP. The connections
        are automatically closed after being idle for about 1 minute, and are
        re-opened as necessary. Postfix versions 2.0 and earlier do not
        randomize the host order.

    
NOTE: if you specify localhost as a hostname (even if you
        prefix it with inet:), MySQL will connect to the default UNIX
        domain socket. In order to instruct MySQL to connect to localhost over
        TCP you have to specify

    


    hosts = 127.0.0.1

  

  

  
The user name and password to log into the mysql server. Example:
    


    user = someone


    password = some_password

  

  

  
The database name on the servers. Example:
    


    dbname = customer_database

  

  

  
The SQL query template used to search the database, where %s is a
      substitute for the address Postfix is trying to resolve, e.g.
    


    query = SELECT replacement FROM aliases WHERE mailbox = '%s'

    
This parameter supports the following '%' expansions:

  







  
%%

  
This is replaced by a literal '%' character.

  
%s

  
This is replaced by the input key. SQL quoting is used to make sure that
      the input key does not add unexpected metacharacters.

  
%u

  
When the input key is an address of the form user@domain, %u is
      replaced by the SQL quoted local part of the address. Otherwise, %u
      is replaced by the entire search string. If the localpart is empty, the
      query is suppressed and returns no results.

  
%d

  
When the input key is an address of the form user@domain, %d is
      replaced by the SQL quoted domain part of the address. Otherwise, the
      query is suppressed and returns no results.

  
%[SUD]

  
The upper-case equivalents of the above expansions behave in the
      query parameter identically to their lower-case counter-parts. With
      the result_format parameter (see below), they expand the input key
      rather than the result value.

  
%[1-9]

  
The patterns %1, %2, ... %9 are replaced by the corresponding most
      significant component of the input key's domain. If the input key is
      user@mail.example.com, then %1 is com, %2 is example
      and %3 is mail. If the input key is unqualified or does not have
      enough domain components to satisfy all the specified patterns, the query
      is suppressed and returns no results.







  

  
The domain parameter described below limits the input keys to
      addresses in matching domains. When the domain parameter is
      non-empty, SQL queries for unqualified addresses or addresses in
      non-matching domains are suppressed and return no results.
    
This parameter is available with Postfix 2.2. In prior
        releases the SQL query was built from the separate parameters:
        select_field, table, where_field and
        additional_conditions. The mapping from the old parameters to the
        equivalent query is:

    

    


    SELECT [select_field]


    FROM [table]


    WHERE [where_field] = '%s'


          [additional_conditions]

    
The '%s' in the WHERE clause expands to the escaped
        search string. With Postfix 2.2 these legacy parameters are used if the
        query parameter is not specified.

    
NOTE: DO NOT put quotes around the query parameter.

  

  

  
Format template applied to result attributes. Most commonly used to append
      (or prepend) text to the result. This parameter supports the following '%'
      expansions:







  
%%

  
This is replaced by a literal '%' character.

  
%s

  
This is replaced by the value of the result attribute. When result is
      empty it is skipped.

  
%u

  
When the result attribute value is an address of the form user@domain,
      %u is replaced by the local part of the address. When the result
      has an empty localpart it is skipped.

  
%d

  
When a result attribute value is an address of the form user@domain,
      %d is replaced by the domain part of the attribute value. When the
      result is unqualified it is skipped.

  
%[SUD1-9]

  
The upper-case and decimal digit expansions interpolate the parts of the
      input key rather than the result. Their behavior is identical to that
      described with query, and in fact because the input key is known in
      advance, queries whose key does not contain all the information specified
      in the result template are suppressed and return no results.







  

  
For example, using "result_format = smtp:[%s]" allows one to use
      a mailHost attribute as the basis of a transport(5) table. After applying
      the result format, multiple values are concatenated as comma separated
      strings. The expansion_limit and parameter explained below allows one to
      restrict the number of values in the result, which is especially useful
      for maps that must return at most one value.
    
The default value %s specifies that each result value
        should be used as is.

    
This parameter is available with Postfix 2.2 and later.

    
NOTE: DO NOT put quotes around the result format!

  

  

  
This is a list of domain names, paths to files, or dictionaries. When
      specified, only fully qualified search keys with a *non-empty* localpart
      and a matching domain are eligible for lookup: 'user' lookups, bare domain
      lookups and "@domain" lookups are not performed. This can
      significantly reduce the query load on the MySQL server.
    


    domain = postfix.org, hash:/etc/postfix/searchdomains

    
It is best not to use SQL to store the domains eligible for
        SQL lookups.

    
This parameter is available with Postfix 2.2 and later.

    
NOTE: DO NOT define this parameter for local(8) aliases,
        because the input keys are always unqualified.

  

  

  
A limit on the total number of result elements returned (as a comma
      separated list) by a lookup against the map. A setting of zero disables
      the limit. Lookups fail with a temporary error if the limit is exceeded.
      Setting the limit to 1 ensures that lookups do not return multiple
    values.








OBSOLETE QUERY INTERFACE




This section describes an interface that is deprecated as of
    Postfix 2.2. It is replaced by the more general query interface
    described above. If the query parameter is defined, the legacy
    parameters described here ignored. Please migrate to the new interface as
    the legacy interface may be removed in a future release.


The following parameters can be used to fill in a SELECT template
    statement of the form:






    SELECT [select_field]


    FROM [table]


    WHERE [where_field] = '%s'


          [additional_conditions]


The specifier %s is replaced by the search string, and is escaped
    so if it contains single quotes or other odd characters, it will not cause a
    parse error, or worse, a security problem.



  

  
The SQL "select" parameter. Example:
    


    select_field = forw_addr

  

  

  
The SQL "select .. from" table name. Example:
    


    table = mxaliases

  

  

  
The SQL "select .. where" parameter. Example:
    


    where_field = alias

  

  

  
Additional conditions to the SQL query. Example:
    


    additional_conditions = AND status = 'paid'

  








SEE ALSO


postmap(1), Postfix lookup table maintenance
postconf(5), configuration parameters
ldap_table(5), LDAP lookup tables
pgsql_table(5), PostgreSQL lookup tables
sqlite_table(5), SQLite lookup tables






README FILES




Use "postconf readme_directory" or
    "postconf html_directory" to locate this information.


DATABASE_README, Postfix lookup table overview
MYSQL_README, Postfix MYSQL client guide






LICENSE




The Secure Mailer license must be distributed with this
  software.






HISTORY


MySQL support was introduced with Postfix version 1.0.






AUTHOR(S)


Original implementation by:
Scott Cotton, Joshua Marcus
IC Group, Inc.
Further enhancements by:
Liviu Daia
Institute of Mathematics of the Romanian Academy
P.O. BOX 1-764
RO-014700 Bucharest, ROMANIA